dmesg - default 2400Mhz
microcode: CPU0 microcode updated early to revision 0x4, date = 2013-06-28
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.2.0-41-generic (buildd@lgw01-52) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #48-Ubuntu SMP Fri Jun 24 11:28:43 UTC 2016 (Ubuntu 4.2.0-41.48-generic 4.2.8-ckt11)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Legacy x87 FPU detected.
x86/fpu: Using 'lazy' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
BIOS-e820: [mem 0x000000000009ac00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000db65efff] usable
BIOS-e820: [mem 0x00000000db65f000-0x00000000db67efff] ACPI data
BIOS-e820: [mem 0x00000000db67f000-0x00000000db76efff] ACPI NVS
BIOS-e820: [mem 0x00000000db76f000-0x00000000dbffffff] reserved
BIOS-e820: [mem 0x00000000dde00000-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000011bffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Dell Inc. Latitude E4310/0T6M8G, BIOS A14 12/05/2013
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x11c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask F80000000 write-back
1 base 080000000 mask FC0000000 write-back
2 base 0C0000000 mask FE0000000 write-back
3 base 0DC000000 mask FFC000000 uncachable
4 base 100000000 mask FE0000000 write-back
5 base 11C000000 mask FFC000000 uncachable
6 disabled
7 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
original variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3520MB, range: 64MB, type UC
reg 4, base: 4GB, range: 512MB, type WB
reg 5, base: 4544MB, range: 64MB, type UC
total RAM covered: 3968M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3520MB, range: 64MB, type UC
reg 4, base: 4GB, range: 512MB, type WB
reg 5, base: 4544MB, range: 64MB, type UC
e820: update [mem 0xdc000000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdb65f max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f2210-0x000f221f] mapped at [ffff8800000f2210]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000094000] 94000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x021f1000, 0x021f1fff] PGTABLE
BRK [0x021f2000, 0x021f2fff] PGTABLE
BRK [0x021f3000, 0x021f3fff] PGTABLE
init_memory_mapping: [mem 0x11be00000-0x11bffffff]
[mem 0x11be00000-0x11bffffff] page 2M
BRK [0x021f4000, 0x021f4fff] PGTABLE
init_memory_mapping: [mem 0x100000000-0x11bdfffff]
[mem 0x100000000-0x11bdfffff] page 2M
init_memory_mapping: [mem 0xc0000000-0xdb65efff]
[mem 0xc0000000-0xdb5fffff] page 2M
[mem 0xdb600000-0xdb65efff] page 4k
BRK [0x021f5000, 0x021f5fff] PGTABLE
BRK [0x021f6000, 0x021f6fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0xbfffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbfffffff] page 2M
RAMDISK: [mem 0x33fd4000-0x35fe1fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000FE300 000024 (v02 DELL )
ACPI: XSDT 0x00000000DB67DE18 000064 (v01 DELL E2 06222004 MSFT 00010013)
ACPI: FACP 0x00000000DB74FC18 0000F4 (v04 DELL E2 06222004 MSFT 00010013)
ACPI: DSDT 0x00000000DB740018 009767 (v01 DELL E2 00001001 INTL 20080729)
ACPI: FACS 0x00000000DB76BF40 000040
ACPI: FACS 0x00000000DB76ED40 000040
ACPI: APIC 0x00000000DB67CF18 00008C (v02 DELL E2 06222004 MSFT 00010013)
ACPI: TCPA 0x00000000DB76DD18 000032 (v02 00000000 00000000)
ACPI: MCFG 0x00000000DB76DC98 00003C (v01 A M I GMCH945. 06222004 MSFT 00000097)
ACPI: HPET 0x00000000DB76DC18 000038 (v01 DELL E2 00000001 ASL 00000061)
ACPI: BOOT 0x00000000DB76DB98 000028 (v01 DELL E2 06222004 AMI 00010013)
ACPI: SLIC 0x00000000DB766818 000176 (v03 DELL E2 06222004 MSFT 00010013)
ACPI: SSDT 0x00000000DB74E018 0009F1 (v01 PmRef CpuPm 00003000 INTL 20080729)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000011bffffff]
NODE_DATA(0) allocated [mem 0x11bff9000-0x11bffdfff]
[ffffea0000000000-ffffea00047fffff] PMD -> [ffff880117600000-ffff88011b5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000011bffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000099fff]
node 0: [mem 0x0000000000100000-0x00000000db65efff]
node 0: [mem 0x0000000100000000-0x000000011bffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000011bffffff]
On node 0 totalpages: 1013240
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3993 pages, LIFO batch:0
DMA32 zone: 13978 pages used for memmap
DMA32 zone: 894559 pages, LIFO batch:31
Normal zone: 1792 pages used for memmap
Normal zone: 114688 pages, LIFO batch:31
Reserving Intel graphics stolen memory at 0xde000000-0xdfffffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 4 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xdb65f000-0xdb67efff]
PM: Registered nosave memory: [mem 0xdb67f000-0xdb76efff]
PM: Registered nosave memory: [mem 0xdb76f000-0xdbffffff]
PM: Registered nosave memory: [mem 0xdc000000-0xdddfffff]
PM: Registered nosave memory: [mem 0xdde00000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88011bc00000 s96728 r8192 d30248 u262144
pcpu-alloc: s96728 r8192 d30248 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Node order, mobility grouping on. Total pages: 997385
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3868732K/4052960K available (8186K kernel code, 1239K rwdata, 3808K rodata, 1464K init, 1292K bss, 184228K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
NR_IRQS:16640 nr_irqs:488 16
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
spurious 8259A interrupt: IRQ7.
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2393.932 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4787.86 BogoMIPS (lpj=9575728)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150619
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Initializing cgroup subsys blkio
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring handled by SMI
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
Freeing SMP alternatives memory: 28K (ffffffff820a5000 - ffffffff820ac000)
ftrace: allocating 30955 entries in 121 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz (fam: 06, model: 25, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
microcode: CPU1 microcode updated early to revision 0x4, date = 2013-06-28
CPU1: Thermal monitoring handled by SMI
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2
CPU2: Thermal monitoring handled by SMI
#3
CPU3: Thermal monitoring handled by SMI
x86: Booted up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (19151.45 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xdb67f000-0xdb76efff] (983040 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 8:56:59, date: 07/01/16
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
Simple Boot Flag at 0xf1 set to 0x1
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
dmi type 0xB1 record - unknown flag
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8800D7029800 0003F0 (v01 PmRef Cpu0Ist 00003000 INTL 20080729)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8800D7082000 000891 (v01 PmRef Cpu0Cst 00003001 INTL 20080729)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8800D702A000 000303 (v01 PmRef ApIst 00003000 INTL 20080729)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF880116733E00 000119 (v01 PmRef ApCst 00003000 INTL 20080729)
ACPI : EC: EC started
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
_OSC request data:1 1f 0
acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x60b0-0x60b7]
pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf5400000-0xf541ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf5480000-0xf5480fff]
pci 0000:00:19.0: reg 0x18: [io 0x6040-0x605f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf5470000-0xf54703ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3b57] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf5460000-0xf5463fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf5450000-0xf54503ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3b0f] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x6090-0x6097]
pci 0000:00:1f.2: reg 0x14: [io 0x6080-0x6083]
pci 0000:00:1f.2: reg 0x18: [io 0x6070-0x6077]
pci 0000:00:1f.2: reg 0x1c: [io 0x6060-0x6063]
pci 0000:00:1f.2: reg 0x20: [io 0x6020-0x603f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf5440000-0xf54407ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xf5430000-0xf54300ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x6000-0x601f]
pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xf5420000-0xf5420fff 64bit]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf53fffff]
pci 0000:02:00.0: [8086:422b] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0xf2c00000-0xf2c01fff 64bit]
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xf2c00000-0xf3ffffff]
pci 0000:03:00.0: [1180:e822] type 00 class 0x080500
pci 0000:03:00.0: MMC controller base frequency changed to 50Mhz.
pci 0000:03:00.0: reg 0x10: [mem 0xf1800000-0xf18000ff]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0xf1800000-0xf2bfffff]
acpiphp: Slot [1] registered
pci 0000:00:1c.3: PCI bridge to [bus 04-09]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf17fffff]
pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [bus 3f]
pci 0000:3f:00.0: [8086:2c62] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
ACPI: Enabled 3 GPEs in block 00 to 3F
ACPI : EC: GPE = 0x10, I/O: command/status = 0x934, data = 0x930
vgaarb: setting as boot device: PCI:0000:00:02.0
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
e820: reserve RAM buffer [mem 0xdb65f000-0xdbffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x1000-0x1003] has been reserved
system 00:00: [io 0x1004-0x1013] has been reserved
system 00:00: [io 0xffff] has been reserved
system 00:00: [io 0x0400-0x047f] could not be reserved
system 00:00: [io 0x0500-0x057f] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs BCM0102 PNP0c31 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (disabled)
pnp 00:05: Plug and Play ACPI device, IDs DLL0410 PNP0f13 (active)
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfed10000-0xfed13fff] has been reserved
system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:06: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] could not be reserved
system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:06: [mem 0xf54c0000-0xf54c0fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.2: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
pci 0000:00:1c.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04-09] add_size 200000 add_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.2: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.3: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf5500000-0xf56fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xf5700000-0xf58fffff 64bit pref]
pci 0000:00:1c.2: BAR 15: assigned [mem 0xf5900000-0xf5afffff 64bit pref]
pci 0000:00:1c.3: BAR 15: assigned [mem 0xf5b00000-0xf5cfffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf53fffff]
pci 0000:00:1c.0: bridge window [mem 0xf5500000-0xf56fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xf2c00000-0xf3ffffff]
pci 0000:00:1c.1: bridge window [mem 0xf5700000-0xf58fffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 03]
pci 0000:00:1c.2: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.2: bridge window [mem 0xf1800000-0xf2bfffff]
pci 0000:00:1c.2: bridge window [mem 0xf5900000-0xf5afffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 04-09]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0xf0400000-0xf17fffff]
pci 0000:00:1c.3: bridge window [mem 0xf5b00000-0xf5cfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0a]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0xe0000000-0xfeafffff window]
pci_bus 0000:01: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:01: resource 1 [mem 0xf4000000-0xf53fffff]
pci_bus 0000:01: resource 2 [mem 0xf5500000-0xf56fffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:02: resource 1 [mem 0xf2c00000-0xf3ffffff]
pci_bus 0000:02: resource 2 [mem 0xf5700000-0xf58fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:03: resource 1 [mem 0xf1800000-0xf2bfffff]
pci_bus 0000:03: resource 2 [mem 0xf5900000-0xf5afffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:04: resource 1 [mem 0xf0400000-0xf17fffff]
pci_bus 0000:04: resource 2 [mem 0xf5b00000-0xf5cfffff 64bit pref]
pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7 window]
pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff window]
pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:0a: resource 7 [mem 0xe0000000-0xfeafffff window]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 32824K (ffff880033fd4000 - ffff880035fe2000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd765f000-0xdb65f000] (64MB) mapped at [ffff8800d765f000-ffff8800db65efff]
microcode: CPU0 sig=0x20655, pf=0x10, revision=0x4
microcode: CPU1 sig=0x20655, pf=0x10, revision=0x4
microcode: CPU2 sig=0x20655, pf=0x10, revision=0x4
microcode: CPU3 sig=0x20655, pf=0x10, revision=0x4
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
futex hash table entries: 2048 (order: 5, 131072 bytes)
Initialise system trusted keyring
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1467363419.712:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zpool: loaded
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1366x768x32, linelength=5504, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90001000000, using 4160k, total 4160k
Console: switching to colour frame buffer device 170x48
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4.1 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC] (on-line)
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
ACPI: Power Button [PBTN]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
tpm_tis 00:03: 1.2 TPM (device-id 0x2001, rev-id 32)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
tpm_tis 00:03: Adjusting TPM timeout parameters.
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 16, io mem 0xf5470000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.2.0-41-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 17, io mem 0xf5450000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.2.0-41-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Warning: Keylock active
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.0-ioctl (2015-8-18) initialised: [email protected]
ledtrig-cpu: registered to indicate activity on CPUs
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
PCCT header not found.
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 496c94160eff313b4f6dec3de299bde8f4a608ce'
registered taskstats version 1
zswap: loading zswap
zswap: using zbud pool
zswap: using lzo compressor
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
evm: HMAC attrs: 0x1
Magic number: 8:816:926
rtc_cmos 00:01: setting system clock to 2016-07-01 08:57:00 UTC (1467363420)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1464K (ffffffff81f37000 - ffffffff820a5000)
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 2044K (ffff880001801000 - ffff880001a00000)
Freeing unused kernel memory: 288K (ffff880001db8000 - ffff880001e00000)
random: systemd-udevd urandom read with 5 bits of entropy available
wmi: Mapper loaded
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 1)
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
sdhci-pci 0000:03:00.0: No vmmc regulator found
sdhci-pci 0000:03:00.0: No vqmmc regulator found
mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
[drm] Initialized drm 1.1.0 20060810
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:26:b9:ef:b1:3a
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: 4041FF-0FF
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x33 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems sxs apst
e1000e 0000:00:19.0 eno1: renamed from eth0
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf5440000 port 0xf5440100 irq 25
ata2: SATA max UDMA/133 abar m2048@0xf5440000 port 0xf5440180 irq 25
ata3: DUMMY
ata4: DUMMY
ata5: SATA max UDMA/133 abar m2048@0xf5440000 port 0xf5440300 irq 25
ata6: SATA max UDMA/133 abar m2048@0xf5440000 port 0xf5440380 irq 25
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 410000) vs hw (e0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
acpi device:3a: registered as cooling_device4
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 170x48
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
usb 1-1.4: new high-speed USB device number 3 using ehci-pci
usb 2-1.1: new high-speed USB device number 3 using ehci-pci
usb 2-1.1: New USB device found, idVendor=2109, idProduct=0811
usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 2-1.1: Product: USB2.0 Hub
hub 2-1.1:1.0: USB hub found
hub 2-1.1:1.0: 4 ports detected
usb 1-1.4: New USB device found, idVendor=0461, idProduct=4db1
usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.4: Product: Laptop_Integrated_Webcam_2M
usb 1-1.4: Manufacturer: CN0F5CWW7866407G0064A00
tsc: Refined TSC clocksource calibration: 2394.000 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x22821391a86, max_idle_ns: 440795325644 ns
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: ATA-8: ST9250414ASG, DED1, max UDMA/133
ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: ATAPI: HL-DT-ST DVD+/-RW GU10N, A102, max UDMA/133
ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
ata1.00: supports DRM functions and may not be fully accessible
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9250414ASG DED1 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
ata2.00: configured for UDMA/133
scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GU10N A102 PQ: 0 ANSI: 5
sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
usb 2-1.7: new full-speed USB device number 4 using ehci-pci
sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
usb 2-1.7: New USB device found, idVendor=413c, idProduct=8187
usb 2-1.7: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.7: Product: DW375 Bluetooth Module
usb 2-1.7: Manufacturer: Dell Computer Corp
usb 2-1.7: SerialNumber: 5CAC4CF41214
usb 2-1.8: new full-speed USB device number 5 using ehci-pci
usb 2-1.8: New USB device found, idVendor=0a5c, idProduct=5801
usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.8: Product: 5880
usb 2-1.8: Manufacturer: Broadcom Corp
usb 2-1.8: SerialNumber: 0123456789ABCD
usb 2-1.8: config 0 descriptor??
usb 2-1.1.3: new full-speed USB device number 6 using ehci-pci
usb 2-1.1.3: New USB device found, idVendor=046d, idProduct=c52b
usb 2-1.1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.1.3: Product: USB Receiver
usb 2-1.1.3: Manufacturer: Logitech
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.0-1.1.3/input2
input: Logitech M215 2nd Gen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.3/2-1.1.3:1.2/0003:046D:C52B.0003/0003:046D:401B.0004/input/input8
logitech-hidpp-device 0003:046D:401B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech M215 2nd Gen] on usb-0000:00:1d.0-1.1.3:1
input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input9
input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input6
clocksource: Switched to clocksource tsc
input: Logitech K330 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.3/2-1.1.3:1.2/0003:046D:C52B.0003/0003:046D:4016.0005/input/input10
logitech-hidpp-device 0003:046D:4016.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K330] on usb-0000:00:1d.0-1.1.3:2
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
random: nonblocking pool is initialized
systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Created slice Root Slice.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Reached target Slices.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Started Braille Device Support.
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Started Read required files in advance.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Created slice system-getty.slice.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started Uncomplicated firewall.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:04: [io 0x0378-0x037b]
parport_pc 00:04: [irq 5]
parport_pc 00:04: activated
parport_pc 00:04: reported by Plug and Play ACPI
parport_pc 00:04: disabled
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Journal Service.
EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150619/utaddress-254)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
systemd-journald[289]: Received request to flush runtime journal from PID 1
Bluetooth: Core ver 2.20
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
SSE version of gcm_enc/dec engaged.
snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xe/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_idt hdaudioC0D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_idt hdaudioC0D0: inputs:
snd_hda_codec_idt hdaudioC0D0: Dock Mic=0xf
snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11
snd_hda_codec_idt hdaudioC0D0: Mic=0xa
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
media: Linux media interface: v0.10
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
usbcore: registered new interface driver btusb
Linux video capture interface: v2.00
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
iwlwifi 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
input: Dell WMI hotkeys as /devices/virtual/input/input11
uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_2M (0461:4db1)
input: Laptop_Integrated_Webcam_2M as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input12
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
dell_laptop: Using i8042 filter function for receiving events
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Ultimate-N 6300 AGN, REV=0x74
iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
cfg80211: World regulatory domain updated:
cfg80211: DFS Master region: unset
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
Adding 5119484k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:5119484k FS
EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
input: HDA Intel Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
input: HDA Intel HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
audit: type=1400 audit(1467356245.975:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=630 comm="apparmor_parser"
audit: type=1400 audit(1467356245.975:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=630 comm="apparmor_parser"
audit: type=1400 audit(1467356246.023:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=630 comm="apparmor_parser"
audit: type=1400 audit(1467356246.023:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=630 comm="apparmor_parser"
audit: type=1400 audit(1467356246.023:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=630 comm="apparmor_parser"
audit: type=1400 audit(1467356246.023:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=630 comm="apparmor_parser"
audit: type=1400 audit(1467356246.175:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=630 comm="apparmor_parser"
audit: type=1400 audit(1467356246.175:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=630 comm="apparmor_parser"
audit: type=1400 audit(1467356246.175:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince-previewer" pid=630 comm="apparmor_parser"
audit: type=1400 audit(1467356246.175:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="sanitized_helper" pid=630 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1
iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
iwlwifi 0000:02:00.0: Radio type=0x0-0x3-0x1
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with 00:1b:2f:bc:61:c9
wlp2s0: send auth to 00:1b:2f:bc:61:c9 (try 1/3)
wlp2s0: authenticated
iwlwifi 0000:02:00.0 wlp2s0: disabling HT as WMM/QoS is not supported by the AP
iwlwifi 0000:02:00.0 wlp2s0: disabling VHT as WMM/QoS is not supported by the AP
wlp2s0: waiting for beacon from 00:1b:2f:bc:61:c9
wlp2s0: associate with 00:1b:2f:bc:61:c9 (try 1/3)
wlp2s0: RX AssocResp from 00:1b:2f:bc:61:c9 (capab=0x411 status=0 aid=8)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
perf interrupt took too long (2504 > 2500), lowering kernel.perf_event_max_sample_rate to 50000